Search results

Filter

Filetype

Your search for "get location from phone number 【Visit Sig8.com】9ZP42K8.hFST" yielded 49197 hits

Measurement of the centrality dependence of J/psi yields and observation of Z production in lead-lead collisions with the ATLAS detector at the LHC

Using the ATLAS detector, a centrality-dependent suppression has been observed in the yield of J/psi mesons produced in the collisions of lead ions at the Large Hadron Collider. In a sample of minimum-bias lead-lead collisions at a nucleon-nucleon centre of mass energy root s(NN) = 2.76 TeV, corresponding to an integrated luminosity of about 6.7 mu b(-1), J/psi mesons are reconstructed via their d

Environmentally assisted initiation and growth of multiple surface cracks

The initial stages of stress corrosion on an amorphous polymer is investigated. This is done by exposing stressed specimens of polycarbonate to an acetone and water solution. The surface develops two distinct features of degradation that appear on different length scales when subjected to tensile stress. Small pits form on the surface and make it rough. These pits are in the order of micrometers,

Statistisk analys av blixtdata för Danmark 2002-2010

Åska hör till ett av de farligaste fenomenen som finns i vår atmosfär. Intresset av att observera åska har alltid funnits hos människan. Först på senare tid har man börjat förstå fysiken bakom fenomenet, även om det fortfarande finns många luckor i kunskapen. Sedan 2000 använder Danmarks Meteorologiska Institut blixtlokaliseringssystemet IMAPCT, som bland annat registrerar nedslagspunkt, strömstyrThunderstorms are one of the most dangerous phenomena in our atmosphere. Mankind has always been interested in observing thunderstorms. It is only recently that we have begun to understand the physics behind this phenomenon. However, there are still many gaps in the knowledge. Since 2000, Denmark has been using the lightning locating system IMPACT which registers strike point, average amperage and

"Äta bör man annars dör man" : Att beskriva och jämföra de argument som används för att förklara och förstå problematiskt förhållande till mat

The main purpose of this paper was to attempt to explain and to understand the causes of various types of eating disorders. The intention of the essay was to examine who are the different parties acting in this particular field that through research or other kinds of work, come to meet individuals that suffer from some kind of eating disorder. The aim was to explore the different concepts used wi

Lifetime measurements of excited states in 169,171,173Os : Persistence of anomalous B(E2) ratios in transitional rare earth nuclei in the presence of a decoupled i13/2 valence neutron

Lifetimes of low-lying excited states in the νi13/2+ bands of the neutron-deficient osmium isotopes 169,171,173Os have been measured for the first time using the recoil-distance Doppler shift and recoil-isomer tagging techniques. An unusually low value is observed for the ratio B(E2;21/2+→17/2+)/B(E2;17/2+→13/2+) in 169Os, similar to the “anomalously” low values of the ratio B(E2;41+→21+)/B(E2;21+

Person centred care and shared decision making: implications for ethics, public health and research

This paper presents a systematic account of ethical issues actualised in different areas, as well as at different levels and stages of health care, by introducing organisational and other procedures that embody a shift towards person centred care and shared decision-making (PCC/SDM). The analysis builds on general ethical theory and earlier work on aspects of PCC/SDM relevant from an ethics perspe

Automotive power electronic future - from an EMC perspective

One way to lower the fuel consumption in future vehicles is to replace mechanically driven systems by electrical. The drawback with this solution is the increasing number of electrical loads, which creates more electromagnetic emissions that could disturb the surrounding environment. Many of the electrically driven loads are controlled by pulse width modulation, which could be a source of electrom

An Experimental Study of Heat Transfer on an Outlet Guide Vane

In the present study, the heat transfer characteristics on the suction and pressure sides of an outlet guide vane (OGV) are investigated by using liquid crystal thermography (LCT) method in a linear cascade. Because the OGV has a complex curved surface, it is necessary to calibrate the LCT by taking into account the effect of viewing angles of the camera. Based on the calibration results, heat tra

Crash Prediction Models for Intersections on Rural Multilane Highways: Differences by Collision Type

Accident prediction models are often used to predict the number of accidents on segments and at intersections in the road network. Most often the models are developed for a total number of crashes for the facility, or crashes by severity. However, the frequency and severity of crashes of different types can be expected to vary with regards to the underlying phenomena that cause them to occur. To b

Carbon uptake and water use in woodlands and forests in southern Australia during an extreme heat wave event in the "angry Summer" of 2012/2013

As a result of climate change warmer temperatures are projected through the 21st century and are already increasing above modelled predictions. Apart from increases in the mean, warm/hot temperature extremes are expected to become more prevalent in the future, along with an increase in the frequency of droughts. It is crucial to better understand the response of terrestrial ecosystems to such temp

Features of the international MSC educational programme in environmental management and modelling

“International Msc Educational Programme in Environmental Management and Modelling” (GeoNetC) is a European Commission funded project under ERASMUS+: Higher Education – International Capacity Building programme (Project No 561967-EPP-1-2015-1-SE-EPPKA2-CBHE-JP). It began in October 2015 and ended in October 2018. Initiated by the Lund University and partners from the Middle East countries, the Geo

On short-ranged pair-potentials for long-range electrostatics

In computer simulations, long-range electrostatic interactions are surprisingly well approximated by truncated, short-ranged pair potentials. Examples are reaction field methods; the Wolf method; and a number of schemes based on cancellation of electric multipole moments inside a cut-off region. These methods are based on the assumption that the polarization of the neglected surroundings can be in

On the solar air heater thermal enhancement and flow topology using differently shaped ribs combined with delta-winglet vortex generators

A numerical investigation has been conducted to study the convective heat transfer enhancement and friction loss behaviors for turbulent flow by using arrays of differently shaped ribs combined with delta-winglet vortex generators (DWVGs) pair on the absorber plate of a solar air heater. Four transverse vortex generators arrays, i.e., 90° continuous ribs, 90° truncated ribs, 60° V-shaped continuou

Mobile Lab on Sharing in Malmö

Cities are seen as one of the leading forces in making our societies sustainable and resource efficient. The latest trends of sharing homes, cars, bikes, tools and other goods are fast entering our urban lives. The sharing economy is a consumption-production mode in a city, in which value is generated through transactions between peers or organisations that offer access to their idling or underuti

A pin-on-disc tribometer study of disc brake contact pairs with respect to wear and airborne particle emissions

In the EU, PM10 from the wear of disc brakes can contribute up to 50% of the total non-exhaust emissions from road transport. The wear originates from the contact surfaces of the friction material and the disc. One possible way to decrease PM10 emissions is to change the materials of the contact pair in terms of composition and coatings. The wear and particle emissions of three novel friction mate

A pin-on-disc simulation of airborne wear particles from disc brakes

A novel test method was used to study the concentration and size distribution of airborne wear particles from disc brake materials. A pin-on-disc tribometer equipped with particle counting instruments was used as test equipment. Material from four different non-asbestos organic (NAO) pads and four different low metallic (LM) pads were tested against material from grey cast iron rotors. The results

Identification and characterization of design fires and particle emissions to be used in performance-based fire design of nuclear facilities

CERN operates one of the most complex particle accelerator facilities in the world. Several different hazards, including fires, are present and need to be investigated and reduced to a tolerable level. Toward this goal, CERN aims at developing a catalog containing detailed fire dynamics descriptions of combustible items present in its facilities. This paper contributes to this catalog in two ways.

Standards, Data Exchange and Intellectual Property Rights in Systems Biology

Intellectual property rights (IPRs) represent a key concern for researchers and industry in basically all (high-tech) sectors. IPRs regularly figure prominently in scientific journals and at scientific conferences and lead to dedicated workshops to increase the awareness and “IPR savviness” of scientists. In 2015, Biotechnology Journal published a report from an expert meeting on “Synthetic Biolog

Investigating the Communicating of Science

This study investigates the challenges and potential pathways for improved science communication, particularly in regards to research on the topic of smallholder food security and for science being generated by universities in sub-Saharan Africa. Questions asked in this study include those that aim to identify the academic substrate from which a university based in Africa must navigate. It also id