Filetype
We investigate error propagation in sliding window decoding of braided convolutional codes (BCCs). Previous studies of BCCs have focused on iterative decoding thresholds, minimum distance properties, and their bit error rate (BER) performance at small to moderate frame length. Here, we consider a sliding window decoder in the context of large frame length or one that continuously outputs blocks in
A (Formula presented.) -configuration is a set of (Formula presented.) blocks on (Formula presented.) points. For Steiner triple systems, (Formula presented.) -configurations are of particular interest. The smallest nontrivial such configuration is the Pasch configuration, which is a (Formula presented.) -configuration. A Steiner triple system of order (Formula presented.), an STS (Formula present
This paper focuses on the use of pulse functions and point matching method to construct the impedance matrix needed for the characteristic mode analysis of dielectric bodies. Taking the results given by a commercial Method of Moments (MoM) solver as a benchmark, the proposed method is shown to facilitate accurate characteristic eigenvectors and eigenvalues on these structures using low order basis
Typical massive multiple-input multiple-output (MIMO) architectures consider a centralized approach, in which all baseband data received by each antenna has to be sent to a central processing unit (CPU) to be processed. Due to the enormous amount of antennas expected in massive MIMO base stations (BSs), the number of connections to the CPU required in centralized massive MIMO is not scalable. In r
This work presents an approach for radio-based localization in non-line-of-sight (NLOS) environments by leveraging a dual-polarization antenna array. By estimating the polarization of the received signal, it is possible to estimate the angle of reflection of a NLOS signal. An estimate of the position of the transmitter concerning the receiver can be obtained based on a joint estimation of the refl
The performance of baseband beamforming in multi-user multiple-input multiple-output (MU-MIMO) systems has been extensively studied for simplified statistical channel models where no angular parameters are taken into account. In contrast, there is little performance analysis with ray-based models, which are more physically motivated, feature prominently in standardization and have been experimenta
The use of ultra-low power wake-up receivers (WuRx) can significantly reduce idle listening energy cost. To tailor a WuRx scheme to orthogonal frequency division multiplexing (OFDM) based systems, such as LTE-MTC or IEEE 802.11, the wake-up signal (WUS) also needs to follow OFDM principles to avoid interfering with other transmissions in the same shared bandwidth. Here, we address this particular
Resandet med tåg har ökat stadigt i Sverige de senaste 30 åren. Takten har varit cirka två-tre procent per år, och vi nu har mer än dubbelt så många resenärer. Med ökat fokus på klimatfrågan stiger resandet nu ännu snabbare. Ett problem som drabbar både resenärer och företag i Sverige är tågförseningar. Ett sätt att beskriva dessa är den andel av alla tåg som kommer fram mer än fem minuter för senTravel by train has increased steadily in Sweden the last 30 years. The pace has been about two to three percent per year, and we now have twice as many passengers. With growing awareness of the changing climate, the pace is increasing further. A problem that affects both passengers and businesses in Sweden is train delays. One way to describe these is as the share of trains that arrive less than
Massive multiple-input multiple-output (MIMO) is becoming a mature technology, and has been approved for standardization in the 5G space. Although there are many papers on the theoretical analysis of massive MIMO, the majority of relevant work assumes the simplified, yet overly idealistic, Kronecker-type model for spatial correlation. Motivated by the deficiencies of the Kronecker model, we invoke
Algorithms for Massive MIMO uplink detection are typically based on a centralized approach, by which baseband data from all antenna modules need to be routed to a central node for further processing. In the case of Massive MIMO, where hundreds or thousands of antennas are expected in the base-station, such architecture requires high interconnection bandwidth between antennas and the central node.
Time-varying spatially-coupled low-density parity-check convolutional codes (SC-LDPC-CCs) exhibit excellent features, but their representation requires a very large number of parameters. On the other hand, the description of time-invariant SC-LDPC-CCs is very convenient and their error rate performance, though usually worse, is often satisfactory. In this paper we investigate the girth properties
With increasing number of wirelessly connected devices having limited energy resources, energy efficient solutions become more and more important. Many studies have addressed schemes where low-power wake-up receivers are used to improve energy efficiency in networks with low traffic intensity (per node) and demands on availability. One such scheme is the duty-cycled wake-up receiver medium access
In this paper, full-and sub-structure characteristic modes (CMs) are explored through the effect of coupling between the target and background structures. The eigenvalues and eigen-current distributions of the first few modes are compared for different coupling levels in the numerical example. Similarities and differences between the two types of CMs in specific conditions are revealed, paving the
This paper presents a broadside antenna with three ports operating at the same frequency. The TM030 and TM003 modes of a patch are excited by two coaxial cables to generate two orthogonal linear polarizations. The patch can be transformed into a slotted SIW cavity whose TE201 and TE102 modes are jointly excited by the third cable. A matching cavity and a matching patch are introduced to broaden th
Massive multiple-input multiple-output (MIMO) arrays are becoming critical elements in cellular base station infrastructure. We utilize the theory of characteristic modes (TCM) to design a novel tri-modal broadside antenna element which is suitable for the construction of compact massive MIMOarrays. The proposed antenna element consists of three ports which is formed by reviewing an existing compa
Context: Continuous experimentation and A/B testing is an established industry practice that has been researched for more than 10 years. Our aim is to synthesize the conducted research. Objective: We wanted to find the core constituents of a framework for continuous experimentation and the solutions that are applied within the field. Finally, we were interested in the challenges and benefits repor
Context. Continuous experimentation is used by many companies to improve their products with users data. In this study, the efficacy of continuous experimentation as used in two different types of business models (product-led or sales-led). Method. Two case companies with a product-led business model and three companies with sales-led business model were compared against each other. 14 interviewee
In this paper we consider spatial coupling in turbo equalization and demonstrate that the code design trade-off between the performance in waterfall and error floor regions can be avoided. We introduce three coupling schemes and compare their performances, where the first method introduces coupling between the encoder and the channel, while the second uses a spatially coupled (SC) code. In the thi
Testing of autonomous systems is extremely important as many of them are both safety-critical and security-critical. The architecture and mechanism of such systems are fundamentally different from traditional control software, which appears to operate in more structured environments and are explicitly instructed according to the system design and implementation. To gain a better understanding of a
