Filtyp
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to fast changes in the environment. We characterize the distribution of the envelope of the first delay bin in vehicle-to-vehicle channels by means of its Rician $K$-factor. We analyze the time–frequency variability of this channel parameter using vehicular channel measurements a
This letter reports the capacity performance of a handheld dual-band dual-antenna compact MIMO terminal, which utilizes uncoupled adaptive impedance matching for capacity maximisation. The capacity is evaluated at 0.825 GHz and 2.35 GHz in an indoor office environment. The results show that adaptive matching enhances capacity by up to 44% and 22% at the low and high frequency bands, respectively,
This paper presents a wireless receiver frontend intended for cellular applications implemented in a 65 nm CMOS technology. The circuit features a low noise amplifier (LNA), quadrature passive mixers, and a frequency divider generating 25 % duty cycle quadrature local oscillator (LO) signals. A complementary common-gate LNA is used, and to meet the stringent linearity requirements it employs posit
The present study deals with Elastic Flow Rerouting (EFR)-an original traffic restoration strategy for protecting traffic flows in communication networks (including wireless networks) against multiple link failures. EFR aims at alleviating the trade-off between practicability of traffic restoration and the cost of network resources observed in existing networking solutions. We present an extension
PalCom is a pervasive middleware that enables users to combine services from different devices into assemblies, or usage scenarios. The mechanism of device discovery in PalCom builds an ad-hoc network of interconnected devices while replacing cross-network periodic keep-alive messages with timely forwarded events that notify devices about the discovery and undiscovery of each other. Moreover, the
A Digitally Controlled Oscillator (DCO) whose power consumption can be reconfigured while maintaining an almost constant phase-noise figure-of-merit (FoM). This is achieved by using either a single-switch-pair or a complementary (i.e., double-switch-pair) oscillator topology, without disturbing the optimized LC tank of the DCO. The optimal power consumption in the complementary (P-N) configuration
We present a method to compute, quickly and efficiently, the mutual information achieved by an independent identically distributed (IID) complex Gaussian signal on a block Rayleigh-faded channel without side information at the receiver. The method accommodates both scalar and multiple-input multiple-output (MIMO) settings. Operationally, this mutual information represents the highest spectral effi
Determining requirements process efficiency, and measuring the corresponding monetary impacts, is a challenging but necessary aspect of project management. In this paper, we perform an independent analysis of scoping decisions from a large industrial project with the goal of providing visualizations that facilitate investigations of process efficiency, agility, and the effects of scoping decisions
Software failures in medical devices can lead to catastrophic situations. Therefore is it crucial to handle software related risks when developing medical devices. This paper presents the experiences gained from an ongoing case study with a medical device development organisation. This part of the study focuses on the two first steps of the risk management process, i.e. risk identification and ris
A VCO is implemented in an RF 90 nm CMOS process and covers the frequency range 2.55-4.08 GHz. Drawing 19 mA from 1.2 V, the phase noise at 20 MHz frequency offset from a 3.7 GHz carrier is -156 dBc/Hz, meeting the phase noise requirement for GSM/EDGE and SAW-less WCDMA transmitter after frequency division by 2 or by 4. A second version of the VCO covers an additional 4.90-5.75 GHz range, at the e
Abstract in UndeterminedIn this paper, a number of channel estimation algorithms for iterative receivers are compared for the case of an up-link orthogonal frequency division multiplexing interleave division multiple access (OFDM-IDMA) system. Both pilot based algorithms, used to obtain an initial estimate, as well as semi-blind decision-directed algorithms working as a component of the iterative
QR decomposition (QRD) is used to solve least squares (LS) problems for a wide range of applications. However, traditional QR decomposition methods, such as Gram-Schmidt (GS), require high computational complexity and non-linear operations to achieve high throughput, limiting their usage on resource-limited platforms. To enable efficient LS computation on embedded systems for real-time application
Context The popularity of the open source software development in the last decade, has brought about an increased interest from the industry on how to use open source components, participate in the open source community, build business models around this type of software development, and learn more about open source development methodologies. There is a need to understand the results of research i
This paper treats the feasibility to use only the sign bit of the in-phase and quadrature components when estimating time and frequency in OFDM systems. Using only the sign bit is shown to result in a frequency dependent bias, which can be easily compensated. The approach is evaluated for LTE and DVB-H, where the estimation is performed using the cyclic prefix, and for WLAN 802.11g, where the estim
A CMOS oscillator employing differential transistor pairs working in Class-C in push-pull configuration is presented. The oscillator exhibits the same advantages enjoyed by complementary topologies on oscillators based on a single differential pair, while yielding a substantial power consumption reduction thanks to the Class-C operation. The phase-noise performance and the fundamental conditions r
This paper compares the capacity improvement capability of spatial multiplexing and beamforming techniques for 60 GHz spatial transmissions in a multi-carrier radio system such as orthogonal frequency division multiplexing. The term beamforming in this paper refers to the conventional gain focusing, for the strongest propagation path, by narrow antenna beams. Our channel capacity metric depends on
We propose new M-algorithm BCJR (M-BCJR) algorithms for low-complexity turbo equalization and apply them to severe intersymbol interference (ISI) introduced by faster than Nyquist signaling. These reduced-search detectors are evaluated in simple detection over the ISI channel and in iterative decoding of coded FTN transmissions. In the second case, accurate log likelihood ratios are essential and
Abstract in UndeterminedIn order to create a successful software product and assure its quality, it is not enough to fulfill the functional requirements, it is also crucial to find the right balance among competing quality requirements (QR). An extended, previously piloted, interview study was performed to identify specific challenges associated with the selection, tradeoff, and management of QR i
