Sökresultat

An integrated biological process for the production of hydrogen based on thermophilic and photo-heterotrophic fermentation was evaluated from a technical and economic standpoint. Besides the two fermentation steps the process also includes pretreatment of the raw material (potato steam peels) and purification of hydrogen using amine absorption. The study aimed neither at determining the absolute c

The new clusters [H(4) Ru(4) (CO)(10) (μ-1,2-P-P)], [H(4) Ru(4) (CO)(10) (1,1-P-P)] and [H(4) Ru(4) (CO)(11) (P-P)] (P-P=chiral diphosphine of the ferrocene-based Josiphos or Walphos ligand families) have been synthesised and characterised. The crystal and molecular structures of eleven clusters reveal that the coordination modes of the diphosphine in the [H(4) Ru(4) (CO)(10) (μ-1,2-P-P)] clusters

This paper describes the performance evaluation of new Delta E detectors to be used as pre-cell hit detectors in living cell irradiation experiments at the Lund Ion Beam Analysis facility (LIBAF). Using these detectors with a thickness down to 4.15 mu m fabricated at Lund University, an experiment was setup in which Delta E-detectors were used together with a stop E-detector in a telescope system

Non-alcoholic fatty liver disease (NAFLD), obesity and type 2 diabetes(T2D) are strongly associated and today their prevalence reaches epidemic proportions. NAFLD has a multi-factorial aetiology, both genetic and environmental factors are equally important. The aim of this thesis was to investigate genetic factors associating with NAFLD and circulating triglyceride (TG) levels in overweight or obe

Parkinson´s disease (PD) is a neurodegenerative disorder characterized by the typical motor symptoms, akinesia/bradykinesia, rigidity and resting tremor. These symptoms are caused by a deficiency of dopamine (DA) in the brain, which depends on degeneration of DA neurons in the substantia nigra. The most effective treatment for PD is the DA precursor, L-DOPA. Unfortunately, within a few years, L-DO

In this paper, we propose a design framework for distributed embedded control systems that ensures reliable execution and high quality of control even if some computation nodes fail. When a node fails, the configuration of the underlying distributed system changes and the system must adapt to this new situation by activating tasks at operational nodes. The task mapping as well as schedules and con

Hip fractures are devastating for the individual and a substantial economic burden for society. The treatment for displaced femoral neck fracture is a choice between internal fixation, total hip arthroplasty and hemiarthroplasty. As a result of several randomized trials, the treatment has shifted in Sweden from mostly internal fixation towards arthroplasties. There have been concerns about long-te

We have developed a method to estimate free energies of reactions in proteins, called QM/MM-PBSA. It estimates the internal energy of the reactive site by quantum mechanical (QM) calculations, whereas bonded, electrostatic, and van der Waals interactions with the surrounding protein are calculated at the molecular mechanics (MM) level. The electrostatic part of the solvation energy of the reactant

Abstract in UndeterminedThe MAX IV facility presently under construction will include two storage rings for the production of synchrotron radiation. Both rings will be operated at a constant 500 mA of stored current with top-up shots supplied by the MAX IV linac acting as a full-energy injector. Until recently, injection into both storage rings was designed using a conventional approach: a closed

Multi-antenna enabled terminal devices are required to comply with the standards for limiting human exposure to electric fields. However, when compared to traditional single-antenna terminals, a comprehensive evaluation of specific absorption rate (SAR) for multi-antenna terminals is impractical. This is because both the power allocation and phase of the electric fields from different antennas are

In object-oriented programs, the relationship of an object to many objects is usually implemented using indirection through a collection. This is in contrast to a relationship to one object, which is usually implemented directly. However, using collections for relationships to many objects does not only mean that accessing the related objects always requires accessing the collection first, it also

This paper presents evidence from the Austronesian languages of Taiwan (Formosan languages) bearing on the ongoing debate between followers of Cinque (1999: Adverbs and functional heads) and Ernst (2002: The syntax of adjuncts): are adverbs adjoined to the clause, with semantically determined ordering, or are they located in functional projections in the backbone of the clause, with the ordering d

Five different low-Mach large eddy simulations are compared to the turbulent stratified flame experiments conducted at the Technical University of Darmstadt (TUD). The simulations were contributed by TUD, the Institute for Combustion Technology (ITV) at Aachen, Lund University (LUND), the EM2C laboratory at Ecole Centrale Paris, and the University of Duisburg-Essen (UDE). Combustion is modeled by

The true revolution in the age of digital neuroanatomy is the ability to extensively quantify anatomical structures and thus investigate structure-function relationships in great detail. To facilitate the quantification of neuronal cell patterns we have developed RipleyGUI, a MATLAB-based software that can be used to detect patterns in the 3D distribution of cells. RipleyGUI uses Ripley's K-functi

This report contains derivations of a rigid double-track ground vehicle model including roll and pitch dynamics, using a Newton-Euler modeling approach. Suspension is incorporated in the model. The suspension system is modeled as a rotational spring and damper system, where the spring and damper constants for each wheel have been lumped to two constants, one for each degree of freedom. The resulti

Simulations are widely used to design and evaluate new protocols and applications of indoor wireless networks. However, the available network simulation tools face the challenges of providing accurate indoor channel models, three-dimensional (3-D) models, model portability, and effective validation. In order to overcome these challenges, this paper presents a new CO-Simulation framework based on M