Filtyp
Natural resources, especially energy resources, are often considered vital to the process of economic development, with the availability of coal considered central for the nineteenth century. Clearly, however, although coal might have spurred economic development, development might also have spurred the discovery and use of coal. To shed light on this, we suggest that the case of resource poor Den
Different methods of trapping radioactive xenon are reviewed. Trapping by adsorption on activated charcoal has the advantage of being simple and cheap and also makes it possible to recycle the xenon. An activated charcoal trapping system is described which can extract 133Xe from 100l of expired air in 10 min from patients undergoing diagnostic pulmonary or circulation studies. Details of the const
The gel chromatography column scanning (GCS) method has been studied, special attention being paid to its suitability for the analysis of 99mTc-labelled compounds and radio-pharmaceuticals. The sample to be analyzed was applied at the top of a column filled with Sephadex G gel. Elution was carried out with 0.9% sodium chloride solution with such a volume that all the radioactivity was retained in
It is of interest to study not only the fundamental behavior of catalysts and reactors but also to ensure that they can be scaled up in size. This paper investigates the scale-up of a glycerol-to-propane process starting from fundamental laboratory data from micro-reactor testing to the kilogram scale. The process is described in detail and consist of the use of design documents and computer simul
We discuss the associated cc¯ and bb¯ quark pairs production in the double-parton scattering (DPS) process in ultraperipheral (UPCs) AA collisions. We derive an analogue of the inclusive DPS pocket formula and the photon-energy dependent effective cross section considering an overlap between the hard SPS scatterings. We provide numerical predictions for the DPS cross sections for the cc¯ bb¯ produ
This paper proposes a framework for the planning of the structural integrity and risk management (SIRM) of offshore structures by utilizing the value of information and action (VoIA) analysis. Multiple structural health information sources, i.e. inspections, structural health monitoring (SHM) and damage detection systems (DDS), are modeled in dependency of the information acquirement state. In the
As more offshore wind parks are commissioned, the focus will inevitably shift from a planning, construction, and warranty focus to an operation, maintenance, and investment payback focus. In this latter case, both short-term risks associated with wind turbine component assemblies, and long-term risks related to integrity of the support structure, are highly important. This research focuses on the
The use of ultra-low power wake-up receivers (WuRx) can significantly reduce idle listening energy cost. To tailor a WuRx scheme to orthogonal frequency division multiplexing (OFDM) based systems, such as LTE-MTC or IEEE 802.11, the wake-up signal (WUS) also needs to follow OFDM principles to avoid interfering with other transmissions in the same shared bandwidth. Here, we address this particular
Selective laser melting (SLM) has gained large interest due to advanced manufacturing possibilities. However, the growing potential also necessitates reliable predictions of structures in particular regarding their long-term behaviour. The constitutive and structural response is thereby challenging to reproduce, due to the complex material behaviour. This motivates the aims of this contribution: T
The damping ratio is a key performance measure in systems that can be modelled as networks of masses and springs. We derive a lower bound on this quantity that applies to such networks when the masses are subject to viscous damping. The result allows the size of the damping ratio to be understood as a function of the system parameters. We use this to derive a decentralised criterion which, if sati
There is increasing interest concerning daylighting in the building sector. However, such knowledge is difficult to penetrate the curricula of architects and designers as existing educational programmes often do not provide sufficient training on BPS. This also leads to superficial use of daylight simulations.This paper presents a proposal for a needs-based education package on daylighting design,
This paper presents a new accelerated testing procedure for plastic gears that is based on several different levels of testing. The iterative testing procedure fulfils requests from the product development process. The following criteria are considered for testing: reduced number of tests, shorter test time and reliable results for different applications. The proposed method was applied over the f
The development of innovative and competitive products and mastery of IT&T technologies are crucial for a company's long-term success in the global market. The main flag bearers for development are product developers, but it is questionable whether the existing systems are appropriate for the education of such professionals. For example, one study found large deficiencies concerning their skil
This paper reports on the first realization of two-phase SLIPI (Structured Laser Illumination Planar Imaging) in combination with LIF/Mie ratio imaging for a single shot mapping of relative SMD (Sauter Mean Diameter) in a transient fuel spray. The technique is applied to a non-combusting multi-jet DISI (direct-injection spark-ignition) spray of ethanol fuel injected into an optically accessible co
Overproduction and purification of membrane proteins are generally challenging and time-consuming procedures due to low expression levels, misfolding, and low stability once extracted from the membrane. Reducing processing steps and shortening the timespan for purification represent attractive approaches to overcome some of these challenges. We have therefore compared a fast “teabag” purification
Genetic diversity in offspring is induced by meiotic recombination, which is initiated between homologs at >200 sites originating from meiotic double-strand breaks (DSBs). Of this initial pool, only 1-2 DSBs per homolog pair will be designated to form meiotic crossovers (COs), where reciprocal genetic exchange occurs between parental chromosomes. Cyclin-dependent kinase 2 (CDK2) is known to locali
EUTelescope is a modular, comprehensive software framework for the reconstruction of particle trajectories recorded with beam telescopes. Its modularity allows for a flexible usage of processors each fulfilling separate tasks of the reconstruction chain such as clustering, alignment and track fitting. The framework facilitates the usage of any position sensitive device for both the beam telescope
An algorithm is said to be certifying if it outputs, together with a solution to the problem it solves, a proof that this solution is correct. We explain how state of the art maximum clique, maximum weighted clique, maximal clique enumeration and maximum common (connected) induced subgraph algorithms can be turned into certifying solvers by using pseudo-Boolean models and cutting planes proofs, an
